LPG Combi Heater Heating and Hot Water Heater Similar to Truma 6e

• After-sales Service: Yes
• Warranty: 1 Year
• Function: Heating
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: FJH-6E
• Control Mode: LCD Controller
• Certification: ISO, CE, CCC
• Name: Combi Heater
• Rated Electric Supply Voltage: 110V/220V
• Operating Voltage Range: DC10.5V~16V
• Short-Term Maximum Power Consumption: 5.6A
• Average Power Consumption: 1.3A
• Power: 6kw
• Fuel Type: LPG
• Working Altitude: ≤5000m
• Protection Level: IP21
• Water Tank: 10L
• Weight: 15.6kg
• MOQ: 1
• Quality: High
• Supply Capacity: 1000/Month
• Transport Package: Carton
• Specification: 600*485*400
• Trademark: NF
• Origin: Heibei, China
• HS Code: 8516299000
• Production Capacity: 1000
• Package Size: 60.00cm * 50.00cm * 40.00cm
• Package Gross Weight: 40.000kg

Product Description

Product Description

 

NFcombi heater is the only one device for vehicle heating and hot water, which takes up less space; Economical and energy-saving work and operation, with a hybrid mode of fuel and city electricity;Send the warm air to the best place for heating the vehicle through four warm air channels;The standard antifreeze safety drain valve can automatically drain when the temperature drops to 1-4ºC;Intelligent plateau function, enjoy the beauty of plateau with peace of mind; It can be combined with air conditioner to realize automatic temperature control

Specification

 

Rated Voltage	DC12V
Operating Voltage Range	DC10.5V~16V
Short-term Maximum Power Consumption	5.6A
Average Power Consumption	1.3A
Gas Heat Power (W)	2000	4000		6000
Fuel Consumption (g/H)	160	320		480
Gas Pressure	30mbar
Warm Air Delivery Volume m3/H	287max
Water Tank Capacity	10L
Maximum Pressure of Water Pump	2.8bar
Maximum Pressure of System	4.5bar
Rated Electric Supply Voltage	~220/110V
Electrical Heating Power	900W		1800W
Electrical Power Dissipation	3.9A		7.8A
Working (Environment) Temperature	-25ºC~+80ºC
Working Altitude	≤1500m
Weight (Kg)	15.6Kg
Dimensions (mm)	510×450×300

Features

The heater is a hot water and warm air integrated machine, which can provide domestic hot water while heating the occupants. This heater allows use during driving. This heater also has the function of using local electricity heating.

In hot water warm air work mode, this heater can be used to heat both the room and the hot water. If only hot water is needed, please choose hot water working mode.
When the ambient temperature is below 3°C, please empty the water in the water tank to prevent freezing of the water tank.
There are three energy options to choose from:
-- Gas Mode
Heater automatic adjust the power.
--Electrical Mode
Manually select the 900W or 1800W heating mode according to the power supply capacity of the RV camp.
--Hybrid Mode
When the power demand is low (for example, maintaining the room temperature stage), the electrical heating is preferred. Until the city electricity cannot meet, the gas heating is started, and the gas heating function is turned off first in the power adjustment phase.
In hot water working mode,gas mode or electrical mode is used to heat the tank.The tank temperature can be set to 40°C or 60°C.
-- Gas Mode
The heater operates at the lowest power. Stop heating immediately after reaching the set temperature.
--Electrical Mode
Manually select the 900W or 1800W heating mode according to the power supply capacity of the camp site.

Safety Instructions
The gas obtained from the liquefied gas tank is mandatory to be in a gaseous state. Liquefied gas is not allowed to avoid danger.
If a gas leak occurs or smells of gas:
--Immediately extinguish the open flame
--Open doors and windows
--Close all valves, liquefied gas tanks
--No smoking
--Do not operate any electrical switches
--Ask the professional to thoroughly check the gas system
--Do not use our company's special accessories

Working Principle

 

Installation and Location

 

Detailed Photos

 

Application

 

  There are three modes you can choose

Certifications

 

FAQ

Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.

Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.

Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.

Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.

Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and
the courier cost.

Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery

Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.