This air conditioner is designed for
1. Installation on a recreational vehicle during or after the time the vehicle is manufactured.
2. Mounting on the roof of a recreational vehicle.
3. Roof construction with rafters/joists on minimum of 16 inch centers.
4. Minimum of 1 inch and maximum of 4 inches distance between roof to ceiling of recreational vehicle.
5. When distance is thicker than 4 inches, an optional duct adaptor will be needed.
The ability of the air conditioner to maintain the desired inside temperature depends on the heat gain of the RV. Some preventative measures taken by the occupants of the RV can reduce the heat gain and improve the performance of the air conditioner. During extremely high outdoor temperatures, the heat gain of the vehicle may be reduced by:
1. Parking the RV in a shaded area
2. Using window shades(blinds and/or curtains)
3. Keeping windows and doors shut or minimizing usage
4. Avoiding the use of heat producing appliances
Operation on High Fan/Cooling mode will give optimum or maxi- mum efficiency in high humidity or high outside temperature.
Starting the air conditioner early in the morning and giving it a"head start" on the expected high outdoor ambient will greatly improve its ability to maintain the desired indoor temperature.
Three controller pannel:
| Model |
NFALP135, NFRTL2-135 |
| Rated Cooling Capacity |
12000BTU |
| Rated Heat Pump Capacity |
12500BTU or optional Heater 1500W |
| Power Supply |
220-240V/50Hz, 220V/60Hz, 115V/60Hz |
| Refrigerant |
R410A |
| Compressor |
special shorter vertical rotary type, LG |
| System |
One motor + 2 fans |
| Inner frame material |
EPP |
| Upper Unit Sizes |
788*632*256 mm |
| Net Weight |
31KG |
For 220V/50Hz,60Hz version, rated Heat Pump Capacity: 12500BTU or optional Heater 1500W
For 115V/60Hz version, optional Heater 1400W only
Features:
low-profile, stable operation, good noise level, lighter weight, smaller chassis
We have three indoor control panels to choose from, you need to choose one of the three.
The first is our latest.
The first:
Parameter:
| Model |
NFACRG16 |
| Size |
540*490*72 mm |
| Net Weight |
4.0 KG |
| Shipping way |
Shipped together with Rooftop A/C |
Features:
1. Remote Controller and Wifi (Mobile Phone App) control, multi control of A/C and the separate Stove
2. More humanized functions like a household air conditioners, Cooling, Dehumidification, Heat Pump, Fan, Automatic, Timer On/off, Ceiling Atmosphere Lamp (Multicolor LED strip) optional, etc
3. Modish design, easy and reliable usage, more comfortable
The second:
Parameter:
| Model |
NFACRG15 |
| Size |
508*508*44.4 mm |
| Net Weight |
3.6 KG |
| Shipping way |
Shipped together with Rooftop A/C |
Features:
1.Electric Control with a Wall-pad controller, fitting both ducted and non ducted installation
2.Multi control of cooling, heater, heat pump and the separate Stove
3.With Fast Cooling function via opening the ceiling vent
The third:
Parameter:
| Model |
NFACDB |
| Size |
539.2*571.5*63.5 mm |
| Net Weight |
4KG |
| Shipping way |
Shipped together with Rooftop A/C |
Features:
1. Mechanical rotary knob control, fitting non ducted installation
2. Control of cooling and heater only
3. Easy and reliable usage, good noise insulation, uniform airflow at both ends (air outlet)
1. Air Filter:
Periodically remove the return air filter located above the removable panel in the air box. Wash the filter with soap and warm water, let dry and then reinstall.
Note: Never run the air conditioner without return air filter in place. This may plug the unit evaporator coil with dirt and may substantially affect the performance of the unit.
2. Air Box Housing:
Clean air box housing and control panel with a soft cloth dampened with a mild detergent. Never use furniture polish or scouring powders.
3.Fan Motor:
Factory lubricated and requires no service under normal use.
4.Frost Formation On Cooling Coil:
Under certain conditions, frost may form on the evaporator coil. If this should occur, inspect the filter and clean if dirty. Make sure air louvers are not obstructed. Air conditioners have a greater tendency to frost when the outside temperature is relatively low. This may be prevented by adjusting the thermostat control knob to a warmer setting(counter clockwise). Should frosting continue, operate on LOW, MED.or HIGH FAN setting until the cooling coil is free of frost.
If your unit fails to operate or operated improperly, check the following before calling your service center.
Hebei Nanfeng Automobile Equipment (Group) Co.,Lid is a group company with 5 factories, that specially produce heaters and heater parts for more than 30 years. We are the leading parking heater manufacturers in China.
Our factory's production units are equipped with high tech machineries, strict quality control testing devices and a team of professional technicians and engineers endorsing the quality and authenticity of our products.
In 2006, our company has passed ISO/TS16949:2002 quality management system certification. We also bagged the CE certificate and Emark certificate making us amongst the only few companies in the world acquiring such high level certifications.
Currently being the largest stakeholders in China, we hold a domestic market share of 40% and then we export them around the globe particularly in Asia, Europe and Americas.
Meeting the standards and demands of our customers have always been our top priority. It always encourages our experts to continuously brain storm, innovate, design and manufacture new products, impeccably suitable for the Chinese market and our customers from every nook of the world.
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 100% in advance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Audited Supplier 
){kind=link}