NF 5kw Hydronic Liquid Parking Heater

• Customization: Available
• After-sales Service: Yes
• Warranty: 1year
• Model NO.: TT-C5
• Function: Heating
• Control Mode: Digital Controller
• Certification: ISO, CE
• Rated Voltage: 12V/24V
• Operating Voltage Range: DC10.5V-15V
• Allowable Operating Pressure: 0.4~2.5 Bar
• Capacity of Heat Exchanger: 0.15L
• Minimum Amount of Cooling Water in The W: 4.00L
• Minimum Water Flow of Heater: 250L/H
• Weight (Kg): 2.9kg
• Working Ambient Temperature: -25ºC~+55ºC
• Contact Resistance: ≤50mΩ
• Fuel: Dissel
• Certificate: CE
• Application: Car Vehicle
• Warranty Period: 1 Year
• Control Method: Digital Controller
• Product Function: Heating
• Transport Package: Carton
• Specification: 214*106*168mm
• Trademark: NF
• Origin: Hebei, China
• HS Code: 8516800000
• Production Capacity: 50000pieces/Year
• Package Size: 22.00cm * 12.00cm * 18.00cm
• Package Gross Weight: 5.000kg

Product Description

Product Description

3 kinds of controllers:
on/off controller, digital timer controller and GSM phone control. You can choose any of them.

working principle:
You can set its running time in the range 10-120 min.
When it is adjusted to 120min, press the right button again to set it to run for unlimited ∞ time. 
1.for example, when you set its running time to 30 min, heater will stop when it ran 30 min. 
2.If you set it to run for unlimited ∞ time, It automatically >80ºC Off, and <60ºC On, until you turn off it by yourself.
It means keep the water temperature between 60ºC to 80ºC.

Product Advantages: 
1. It has all mounting kits, such as fuel pump, water pipe, fuel line, hose clamp and so on
2. Lower fuel consumption and instant heating. 
3. Compact structure and easy installation. 
4. Low noise operation to ensure comfortable driving. 
5. Continuous functional monitoring to reduce diagnosing time. 
6. Application Scope: Various vehicles with diesel as the fuel.

The liquid parking heater is not affected by the vehicle engine when it works, and is connected to the vehicle's cooling system, fuel system and electrical system.

Product Parameters

 

Water parking heater	Operating status	TT-C5-B	TT-C5-D	TT-C5-D
Structure type		Water parking heater with evaporative burner
Heating capacity	full load Part load	5.2kw 2.5kw
Fuel type		Gasoline	Diesel	Diesel/PME
Fuel consumption	full load Part load	0.7l/h 0.34l/h	0.61l/h 0.30l/h
Rated voltage		12v/24v
Working voltage		10.5~15v
Rated power consumption (Without water pump, car blower)	full load Part load	28W 18W
Allowable ambient temperature Heater:     --running            --store Oil pump:   --running		-40ºC~+60ºC -40ºC~+120ºC -40ºC~+20ºC		-40ºC~+60ºC -40ºC~+120ºC -20ºC~+20ºC
Allowable operating pressure		0.4~2.5 bar
Capacity of heat exchanger		0.15L
Minimum amount of cooling water in the waterway		4.00L
Minimum water flow of heater		250l/h
Heater dimensions(mm)		(L)214*(W)106*(H)168
Heater weight(kg)		2.9kg

Application

The application range of liquid parking heaters
After the liquid parking heater TT-C5 is connected to the heating system of the car, it can be used for:
- Preheat engine coolant in Winter for Car/Boat/Caravan
- Provide hot water for bathing and domestic hot water in Caravan
- work together with radiator to heat the car compartment 
- Defrost the front windshield

The liquid parking heater is not affected by the vehicle engine when it works, and is connected to the vehicle's cooling system, fuel system and electrical system.

Installation Location

Liquid parking heaters are only allowed to be installed outside the car.
The heater is best installed in the engine room, the splash protection area of the front fender, or the fender.
The heater should be installed as low as possible to ensure that the heater and the water pump can automatically exhaust. This is
especially true for pumps that cannot pump independently.

Note:
In any possible installation position, the nozzle of the water pipe should not face downwards.

Note:
The heater must not be installed in:
-Places close to or higher than high temperature parts in the car;
-The direct splash area of the wheel:
-Below the car's wading line.
 

Company Profile

 

Hebei Nanfeng Automobile Equipment (Group) Co., Ltd is a group company with 5 factories, that specially produce parking heaters, heater parts, air conditioner and electric vehicle parts for more than 30 years. We are the leading auto parts manufacturers in China.

Our factory's production units are equipped with high tech machineries, strict quality,control testing devices and a team of professional technicians and engineers endorsing the quality and authenticity of our products.

 

In 2006, our company has passed ISO/TS16949:2002 quality management system certification. We also bagged the CE certificate and Emark certificate making us among the only few companies in the world acquiring such high level certifications.

Currently being the largest stakeholders in China, we hold a domestic market share of 40% and then we export them around the globe particularly in Asia, Europe and Americas.

 

Meeting the standards and demands of our customers have always been our top priority. It always encourages our experts to continuously brain storm, innovate, design and manufacture new products, impeccably suitable for the Chinese market and our customers from every nook of the world.
 

 

 

FAQ

Q1. What is your terms of packing?

A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

 

Q2. What is your terms of payment?

A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

 

Q3. What is your terms of delivery?

A: EXW, FOB, CFR, CIF, DDU.

 

Q4. How about your delivery time?

A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

 

Q5. Can you produce according to the samples?

A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

 

Q6. What is your sample policy?

A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

 

Q7. Do you test all your goods before delivery?

A: Yes, we have 100% test before delivery

 

Q8: How do you make our business long-term and good relationship?

A:1. We keep good quality and competitive price to ensure our customers benefit ;

2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.