We have 3 kinds of controllers: on/off controller, digital timer controller and GSM phone control.
ON-OFF CONTROLLER
The use of on-off controller is simpler and easier to operate.
It automatically >80ºC Off, and <60ºC On, until you turn off it by yourself.
DIGITAL CONTROLLER
1. Timing start-up: the controller can be started up at a certain time once the time is pre-set.
2. Default diagnosis: once the heater suffers a default, what kind of default will be displayed automatically.
3. Status indicaation: show the current status of the heater.
4. Wireless control: the heater can be under the form of wireless remote control.
GSM CONTROLLER
The GSM mobile phone controller can not only start and set the water parking heater by sending text messages, but also set it by using Webasto TC3 APP.
You can set the heater through your mobile phone anytime and anywhere, making your life more convenient!
Water parking heater |
Operating status |
TT-C5-B |
TT-C5-D
|
TT-C5-D |
Structure type
|
|
Water parking heater with evaporative burner |
Heating capacity |
full load
Part load |
5.2kw
2.5kw |
Fuel type |
|
Gasoline |
Diesel |
Diesel/PME |
Fuel consumption |
full load
Part load |
0.7l/h
0.34l/h |
0.61l/h
0.30l/h |
Rated voltage |
|
12v/24v |
Working voltage |
|
10.5~15v |
Rated power consumption
(Without water pump, car blower) |
full load
Part load |
28W
18W |
Allowable ambient temperature
Heater: --running
--store
Oil pump: --running |
|
-40ºC~+60ºC
-40ºC~+120ºC
-40ºC~+20ºC
|
-40ºC~+60ºC
-40ºC~+120ºC
-20ºC~+20ºC |
Allowable operating pressure |
|
0.4~2.5 bar |
Capacity of heat exchanger |
|
0.15L |
Minimum amount of cooling water in the waterway |
|
4.00L |
Minimum water flow of heater |
|
250l/h |
CO2 content in exhaust gas |
|
8~12%(Volume percentage) |
Heater dimensions(mm) |
|
(L)214*(W)106*(H)168 |
Heater weight(kg) |
|
2.9kg |
Liquid parking heaters are only allowed to be installed outside the car.
The heater is best installed in the engine room,the splash protection area of the front fenderor the fender.
The heater should be installed as low as possible to ensure that the heater and the water pump can automatically exhaustThis is especially true for pumps that cannot pumpindependently.
Note:
In any possible installation position the nozzle of the water pipe should not face downwards.
Note:
The heater must not be installed in:
-Places close to or higher than high temperature parts in the car;
-The direct splash area of the wheel;
-Below the car's wading line.
1. It has all mounting kits, such as fuel pump, water pipe, fuel line, hose clamp and so on.
2. Lower fuel consumption and instant heating.
3. Compact structure and easy installation.
4. Low noise operation to ensure comfortable driving.
5. Continuous functional monitoring to reduce diagnosing time.
6. Application Scope: Various vehicles with diesel as the fuel.
The application range of liquid parking heaters
After the liquid parking heater TT-C5 is connected to the heating system of the car, it can be used for:
- Preheat engine coolant in Winter for Car/Boat/Caravan
- Provide hot water for bathing and domestic hot water in Caravan
- work together with radiator to heat the car compartment
- Defrost the front windshield
The liquid parking heater is not affected by the vehicle engine when it works, and is connected to the vehicle's cooling system, fuel system and electrical system.
Hebei Nanfeng Automobile Equipment (Group) Co.,Lid is a group company with 5 factories, that specially produce heaters and heater parts for more than 30 years. We are the leading parking heater manufacturers in China.
Our factory's production units are equipped with high tech machineries, strict quality control testing devices and a team of professional technicians and engineers endorsing the quality and authenticity of our products.
In 2006, our company has passed ISO/TS16949:2002 quality management system certification. We also bagged the CE certificate and Emark certificate making us amongst the only few companies in the world acquiring such high level certifications.
Currently being the largest stakeholders in China, we hold a domestic market share of 40% and then we export them around the globe particularly in Asia, Europe and Americas.
Meeting the standards and demands of our customers have always been our top priority. It always encourages our experts to continuously brain storm, innovate, design and manufacture new products, impeccably suitable for the Chinese market and our customers from every nook of the world.
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 100% in advance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.