6kw High Voltage Coolant Heater with Can Protocol Hv Electronic Heater for EV Fcev

• After-sales Service: Yes
• Warranty: 1 Year
• Function: Heating
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: NF-WPTC01
• Control Mode: Can Control
• Certification: ISO, CE, CCC
• Name: PTC Coolant Heater
• Rated Voltage: DC600V
• Power: 6kw
• High Voltage Working Voltage/V: 450-750
• Low Voltage Operating Voltage/V: 9-16/18-32
• Low Voltage: 12V/24V
• Flow Rate: 10L/Min
• Pressure: 70kpa~106ka
• Communication Protocol: Can
• Weight: 5kg
• Application: Electric Vehicle/Bev/Hev
• Quality: Good
• MOQ: 1
• Ambient Temperature: 0ºC±2ºC
• Transport Package: Carton
• Specification: 56*45*22
• Trademark: NF
• Origin: Heibei, China
• HS Code: 8516299000
• Production Capacity: 1000
• Package Size: 56.00cm * 45.00cm * 22.00cm
• Package Gross Weight: 5.000kg

Product Description

Product Description

 

6kw high voltage coolant heater with CAN protocol HV electronic heater for EV FCEV 

This PTC electric heater is suitable for electric / hybrid / fuel cell vehicles and is mainly used as the main heat source for temperature regulation in the vehicle. The PTC electric heater is applicable to both vehicle driving mode and parking mode. In the heating process, electric energy is effectively converted into heat energy by PTC components. Therefore, this product has faster heating effect than internal combustion engine. At the same time, it can also be used for battery temperature regulation (heating to working temperature) and fuel cell starting load.

 

The PTC electric heater adopts PTC technology to meet the safety requirements of passenger cars for high voltage. In addition, it can also meet the relevant environmental requirements of components in the engine compartment.

 

The purpose of PTC electric heater in application is to replace the engine block as the main source of heat source. By supplying power to the PTC heating group, the PTC heating component is heated, and the medium in the circulating pipeline of the heating system is heated through heat exchange.

Product Parameters

 

Medium temperature	-40ºC~105ºC
Medium type	Water: ethylene glycol /50:50
Rated Power/kw	6000±10%@10L/min,Tn=0ºC
Pressure	70kPa~106ka
Insulation resistance MΩ	≥50
Communication protocol	CAN
Connector IP rating(high and low votage)	IP67
High voltage working voltage/V (DC)	450-750
Low voltage operating voltage/V(DC)	9-16 or 18-32
Weight(KG)	2.5

Function

PTC water heater can provide heat for the cockpit of new energy vehicles and meet the standard of safe

defrosting and defogging. It also provides heat to other parts of the vehicle that require temperature

regulation, such as the battery.

Our Advantages

Electricity is used to heat the antifreeze,and the heater is used to heat the interior of the car.

Installed in the water cooling circulation system

Warm air soft temperature controllable

Adopt PWM to adjust and drive IGBT to adjust power

With short-term heat storage function

Vehicle cycle, support battery thermal management

Environmental protection

Product Structure Drawing

 Dimension

Application

Packaging & Shipping

 

Company Profile

Hebei Nanfeng Automobile Equipment (Group) Co., Ltd is a group company with 5 factories, that specially produce parking heaters, heater parts, air conditioner and electric vehicle parts for more than 30 years. We are the leading auto parts manufacturers in China.
 
Our factory's production units are equipped with high tech machineries, strict quality,control testing devices and a team of professional technicians and engineers endorsing the quality and authenticity of our products.
 
In 2006, our company has passed ISO/TS16949:2002 quality management system certification. We also bagged the CE certificate and Emark certificate making us among the only few companies in the world acquiring such high level certifications. Currently being the largest stakeholders in China, we hold a domestic market share of 40% and then we export them around the globe particularly in Asia, Europe and Americas.
 
Meeting the standards and demands of our customers have always been our top priority. It always encourages our experts to continuously brain storm, innovate, design and manufacture new products, impeccably suitable for the Chinese market and our customers from every nook of the world.

FAQ

Q1. What is your terms of packing?

A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

 

Q2. What is your terms of payment?

A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.

 

Q3. What is your terms of delivery?

A: EXW, FOB, CFR, CIF, DDU.

 

Q4. How about your delivery time?

A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

 

Q5. Can you produce according to the samples?

A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

 

Q6. What is your sample policy?

A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

 

Q7. Do you test all your goods before delivery?

A: Yes, we have 100% test before delivery

 

Q8: How do you make our business long-term and good relationship?

A:1. We keep good quality and competitive price to ensure our customers benefit ;

2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.