Product Description
Jet liquid heater is a digital-control warming equipment independent of motor,its controll part has many functions:open at low temperature,stop at high temperature,alarm and stop when in trouble,show water temperature. It is also set multiple protection measure. As bus warm equipment , it has lots of performance super to products:
1 supplying oil is not affected by voltage to make combustion more steady.
2 back-oil makes products ecnomizing energy.
3 newly heat exchange device can raise heat efficiency.
4 using high-voltage oil fog and high-voltage electrode igniter,opening and closing do not cause pollution,jet liquid heater can apply to pre-heat water-cool motor in low temperature,it can keep refrigerant between 65ºC and 80ºC automotically. Using it to pre-heating motor in winter will reduce motor damage ,decrease oil-exhausting and prolong life of motor.
Technical Parameter:
| Model |
YJP-Q16.3 |
YJP-Q20 |
YJP-Q25 |
YJP-Q30 |
YJP-Q35 |
| Heat flux(KW) |
16.3 |
20 |
25 |
30 |
35 |
| Fuel consumption(L/h) |
1.87 |
2.37 |
2.67 |
2.97 |
3.31 |
| Working voltage(V) |
DC12/24V |
| Power consumption(W) |
170 |
| Weight(kg) |
22 |
24 |
| Dimensions(mm) |
570×360×265 |
610×360×265 |
| Usage |
Motor operates in low temperature and warming, defrosting of bus |
| Media circling |
Water pump force circle
|
Detailed Image
Principle
Under the operation of motor, oil is taken to jet by pump to produce oil fog under high speed air blow with motor circling. oil fog is burning under high voltage discharge of igniting electrode, its heat is sent to circling liquid in heat exchanger by conductive slice, under the operating of pump, liquid is taken to radiant equipment to make vehicle warm and defrost.
Attention!
1Fuel is diesel, kerosene is not fit, No petrol!
2In winter ,when temperature is below 0ºC,add antifreeze into heater,if adding water, heater should be empty everyday to prevent freezing
3Rated voltage: DC24V
4Being be prohibitted from shutting down general power before combustion light quenches
5Being prohibitted from changing any parts ,or not ,it will not at the range of maintenance
6usage enviroment:
6-1 usage temperature:-40ºC~+50ºC
6-2 storage temperature:-50ºC~+80ºC
6-3 altitude ≤3000M (>3000M special order)
Product Advantages
- Applying fuel spray atomization, the burn efficiency is high and the exhaust fulfills European environmental protection standards.
- High-voltage arc ignition, ignition current is only 1.5 A, and ignition time is less than 10 seconds Due to the fact that key elements are imported in the original package, reliability is high and service life is long.
- Welded by the most advanced welding robot, each heat exchanger has a good appearance and high coherence.
- Applying concise, safe and fully automatic program control; and highly precise water temperature sensor and over-temp protection are used to double safety protection.
- Suitable for preheating engine at cold start, heating the passenger compartment and defrosting the windshield in various types of passenger buses, trucks, construction vehicles
The application of bus water heater
Certification
Customer Feedback
Package&delivery
Our Service
1. OEM Manufacturing welcome: Product, Package...
2. Sample order
3. We will reply you for your inquiry in 24 hours.
4. After sending, we will track the products for you once every two days, until you get the products. When you got the goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer the solve way for you.
FAQ
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
){kind=link}
){kind=link}