5kw PTC High Voltage Coolant Heater for Electric Vehicles Similar to Espar PTC Heater

• After-sales Service: Yes
• Warranty: 1 Year
• Function: Cooling & Heating
• Control Mode: Can
• Certification: ISO, CE
• Power/Kw: 5kw@60 Degrees Celsius, 10L/Min
• Model NO.: SH05
• Medium Temperature: -40~+90 Celsius
• Medium Type: Water: Ethylene Glycol /50:50
• Brust Pressure: 5bar
• Insulation Resistance MΩ: More Than or Equal to 50 @ DC1000V
• Communication Protocol: Can
• Connector IP Level(High and Low Votage): IP67
• High Voltage Working Voltage/V (DC): 450V~750V
• Low Voltage Operating Voltage/V(DC): 9-32
• Low Voltage Quiescent Current: Less Than 0.1mA
• Transport Package: Carton/Wooden
• Specification: 32*26*21cm
• Trademark: NF
• Origin: Hebei, China
• HS Code: 85168000
• Production Capacity: 50000PCS/Year

Product Description

 

Product Description

5KW PTC high voltage coolant heater for Electric Vehicles similar to Espar PTC heater
                                                                                                                        --SH-05

This PTC electric heater is suitable for electric / hybrid / fuel cell vehicles and is mainly used as the main heat source for temperature regulation in the vehicle. The PTC electric heater is applicable to both vehicle driving mode and parking mode. In the heating process, electric energy is effectively converted into heat energy by PTC components. Therefore, this product has faster heating effect than internal combustion engine. At the same time, it can also be used for battery temperature regulation (heating to working temperature) and fuel cell starting load. 

The PTC electric heater adopts PTC technology to meet the safety requirements of passenger cars for high voltage. In addition, it can also meet the relevant environmental requirements of components in the engine compartment. 

The purpose of PTC electric heater in application is to replace the engine block as the main source of heat source. By supplying power to the PTC heating group, the PTC heating component is heated, and the medium in the circulating pipeline of the heating system is heated through heat exchange. 

Detailed Photos

 

Product Parameters

1. Rated working voltage: DC 600V, high-voltage power supply voltage range: DC 450V-750V; 

2. Low-voltage power supply voltage range: DC 9-32V; 

3.Rated power: 5KW±10% (test conditions: medium temperature 60±2ºC, flow rate 10±1L/MIN, medium to high water) ;

4.High voltage connector : 805-972-021, 
Low voltage connector : 805-031-551; 

Model	02.23.101.2XXX
Medium temperature	-40ºC~90ºC
Medium type	Water: ethylene glycol /50:50
Power/kW	5kw@60ºC,10L/min
Brust pressure	5bar
Insulation resistance MΩ	≥50 @ DC1000V
Communication protocol	CAN
Connector IP level(high and low votage)	IP67
High voltage working voltage/V (DC)	450-750
Low voltage operating voltage/V(DC)	9-32
Low voltage quiescent current	< 0.1mA

 

Application

Our Advantages

Users of electric vehicles don't want to go without the comfort of heating that they are used to in combustion engine vehicles. That's why a suitable heating system is just as important as the battery conditioning, which helps to extend service life, reduce charging time and increase range.
This is where the third generation of NF high voltage PTC heater comes in, providing the benefits of battery conditioning and heating comfort for special series from body manufacturers and OEMs.

The main performance features are as follows:
1.With compact structure and high power density, it can flexibly adapt to the installation space of the whole vehicle.
2.The use of plastic shell can realize the thermal isolation between the shell and the frame, so as to reduce the heat dissipation and improve the efficiency.
3.Redundant sealing design can improve the reliability of the system.

Packaging & Shipping

The PTlC electrical heater is packed by vacuum, then the whole is packed by carton.

 

Certifications

 

FAQ

Q1. What is your terms of packing?

A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.

 

Q2. What is your terms of payment?

A: T/T 100% in advance.

 

Q3. What is your terms of delivery?

A: EXW, FOB, CFR, CIF, DDU.

 

Q4. How about your delivery time?

A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

 

Q5. Can you produce according to the samples?

A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

 

Q6. What is your sample policy?

A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

 

Q7. Do you test all your goods before delivery?

A: Yes, we have 100% test before delivery

 

Q8: How do you make our business long-term and good relationship?

A:1. We keep good quality and competitive price to ensure our customers benefit ;

2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.