Jet liquid heater is a digital-control warming equipment independent of motor, its controll part has many functions: open at low temperature, stop at high temperature,alarm and stop when in trouble, show water temperature. It is also set multiple protection measure. As bus warm equipment , it has lots of performance super to congener products:
1 supplying oil is not affected by voltage to make combustion more steady.
2 back-oil makes products ecnomizing energy
3 newly heat exchange device can raise heat efficiency
4 using hi-voltage oil fog and hi-voltage electrode igniter,opening and closing do not cause pollution , jet liquid heater can apply to pre-heat water-cool motor in low temperature,it can keep refrigerant between 65ºC and 80ºC automotically. Using it to pre-heat motor in winter will reduce motor damage ,decrease oil-exhausting and prolong life of motor.
| Model |
YJP-Q16.3 |
YJP-Q20 |
YJP-Q25 |
YJP-Q30 |
YJP-Q35 |
| Heat flux(KW) |
16.3 |
20 |
25 |
30 |
35 |
| Fuel consumption(L/h) |
1.87 |
2.37 |
2.67 |
2.97 |
3.31 |
| Working voltage(V) |
DC12/24V |
| Power consumption(W) |
170 |
| Weight(kg) |
22 |
24 |
| Dimensions(mm) |
570×360×265 |
610×360×265 |
| Usage |
Motor operates in low temperature and warming, defrosting of bus |
| Media circling |
Water pump force circle |
Detailed Image:
Under the operation of motor, oil is taken to jet by pump to produce oil fog under high speed air blow with motor circling. oil fog is burning under high voltage discharge of igniting electrode, its heat is sent to circling liquid in heat exchanger by conductive slice, under the operating of pump, liquid is taken to radiant equipment to make vehicle warm and defrost.
Attention!
1. Fuel is diesel, kerosene is not fit, No petrol!
2. In winter ,when temperature is below 0ºC,add antifreeze into heater,if adding water, heater should be empty everyday to prevent freezing.
3. Rated voltage: DC24V
4. Being be prohibitted from shutting down general power before combustion light quenches.
5. Being prohibitted from changing any parts ,or not ,it will not at the range of maintenance.
6. Usage enviroment:
6-1 usage temperature:-40ºC~+50ºC
6-2 storage temperature:-50ºC~+80ºC
6-3 altitude ≤3000M (>3000M special order)
1. Applying fuel spray atomization, the burn efficiency is high and the exhaust fulfills European environmental protection standards.
2. High-voltage arc ignition, ignition current is only 1.5 A, and ignition time is less than 10 seconds Due to the fact that key elements are imported in the original package, reliability is high and service life is long.
3. Welded by the most advanced welding robot, each heat exchanger has a good appearance and high coherence.
4. Applying concise, safe and fully automatic program control; and highly precise water temperature sensor and over-temp protection are used to double safety protection.
5. Suitable for preheating engine at cold start, heating the passenger compartment and defrosting the windshield in various types of passenger buses, trucks, construction vehicles.
Hebei Nanfeng Automobile Equipment (Group) Co.,Lid is a group company with 5 factories, that specially produce heaters and heater parts for more than 30 years. We are the leading parking heater manufacturers in China.
Our factory's production units are equipped with high tech machineries, strict quality control testing devices and a team of professional technicians and engineers endorsing the quality and authenticity of our products.
In 2006, our company has passed ISO/TS16949:2002 quality management system certification. We also bagged the CE certificate and Emark certificate making us amongst the only few companies in the world acquiring such high level certifications.
Currently being the largest stakeholders in China, we hold a domestic market share of 40% and then we export them around the globe particularly in Asia, Europe and Americas.
Meeting the standards and demands of our customers have always been our top priority. It always encourages our experts to continuously brain storm, innovate, design and manufacture new products, impeccably suitable for the Chinese market and our customers from every nook of the world.
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 100% in advance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Audited Supplier 
){kind=link}