NF Automotive High Voltage Coolant Heater for ev
NF 6KW PTC Coolant Heater for Vehicle is suitable for electric / hybrid / fuel cell vehicles and is mainly used as the main heat source for temperature regulation in the vehicle. The PTC electric heater is applicable to both vehicle driving mode and parking mode. In the heating process, electric energy is effectively converted into heat energy by PTC components. Therefore, this product has faster heating effect than internal combustion engine. At the same time, it can also be used for battery temperature regulation (heating to working temperature) and fuel cell starting load.
Features:
The electric heating antifreeze is used to heat the car through the heater core body.
Installed in the water cooling circulation system.
The warm air is mild and the temperature is controllable.
The power of IGBT is regulated by PWM.
The utility model has the function of short-time heat storage.
Vehicle cycle, support battery heat management.
Environmental Protection.
Item
|
WPTC01-1
|
WPTC01-2
|
Heating output
|
6kw@10L/min,T_in 40ºC
|
6kw@10L/min,T_in 40ºC
|
Rated voltage(VDC)
|
350V
|
600V
|
Working voltage(VDC)
|
250-450
|
450-750
|
Controller low voltage
|
9-16 or 18-32V
|
9-16 or 18-32V
|
Control signal
|
CAN
|
Heater dimension
|
232.3 * 98.3 * 97mm
|
232.3 * 98.3 * 97mm
|
Installation dimension
|
144*128*119
|
144*128*119
|
Joint dimension
|
φ25, φ20mm
|
φ25, φ20mm
|
Heater weight
|
<2.4kg
|
<2.4kg
|
According to the voltage requirement of 600V, the PTC sheet adopts 3.5mm thickness and Tc210ºC, which ensures good withstand voltage and durability. The internal heating core components of the product are divided into 4 groups, which are controlled by 4 IGBTs.In order to ensure the protection level of the product IP67, the heating core component of the product is installed into the lower base, sealed with potting glue in the lower base, and potted to the upper surface of the D-shaped tube. After assembling other parts, use a gasket to press and seal between the upper and lower bases to ensure good waterproof performance of the product.
Due to its low thermal mass, the coolant heater has a high thermal power density with short response times. As a result, the technology draws less power from the battery than from comparable systems, resulting in an increase in range for purely electric driving. In addition, the technology generates comfortable vehicle interior temperatures within a very short time.
The main advantage are as follows:
1.Compact structure, high power density, can be flexibly adapted to the vehicle installation space.
2.The plastic shell can achieve thermal isolation from the frame, so as to reduce heat dissipation and improve efficiency.
3.The redundancy seal design can improve the system reliability.
Hebei Nanfeng Automobile Equipment (Group) Co.,Lid is a group company with 5 factories, that specially produce heaters and heater parts for more than 30 years. We are the leading parking heater manufacturers in China.
Our factory's production units are equipped with high tech machineries, strict quality control testing devices and a team of professional technicians and engineers endorsing the quality and authenticity of our products.
In 2006, our company has passed ISO/TS16949:2002 quality management system certification. We also bagged the CE certificate and Emark certificate making us amongst the only few companies in the world acquiring such high level certifications.
Currently being the largest stakeholders in China, we hold a domestic market share of 40% and then we export them around the globe particularly in Asia, Europe and Americas.
Meeting the standards and demands of our customers have always been our top priority. It always encourages our experts to continuously brain storm, innovate, design and manufacture new products, impeccably suitable for the Chinese market and our customers from every nook of the world.
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters.
Q2. What is your terms of payment?
A: T/T 100% in advance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 30 to 60 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.