| After-sales Service: | Yes |
|---|---|
| Warranty: | 1year |
| Function: | Cooling & Heating |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 
Product features:
1. 48-72V products, suitable for saloons, new energy electric vehicles, elderly scooters, electric sightseeing vehicles, enclosed electric tricycles, electric forklifts, electric sweeper and other battery powered small vehicles.
2. Vehicles with sunroof can be installed without damage, without drilling, without damage to the interior, can be restored to the original car at any time.
3. Air conditioning internal standardized vehicle grade design, modular layout, stable performance.
4. The whole aircraft high strength material, bearing load without deformation, environmental protection and light, high temperature resistance and anti-aging.
5. Compressor adopts scroll type, vibration resistance, high energy efficiency, low noise.
6. Bottom plate arc design, more fit the body, beautiful appearance, streamline design, reduce wind resistance.
7. Air conditioning can be connected to the water pipe, free of condensed water flowing troubles.
| Power | 300-800W | Rated voltage | 12V |
| Cooling capacity | 600-2000W | Battery requirements | ≥150A |
| Rated current | 50A | Refrigerant | R-134a |
| Maximum current | 80A | Electronic fan air volume | 2000M³/h |
| Power | 500-1000W | Rated voltage | 24V |
| Cooling capacity | 2600W | Battery requirements | ≥100A |
| Rated current | 35A | Refrigerant | R-134a |
| Maximum current | 50A | Electronic fan air volume | 2000M³/h |
| Input voltage | DC43V-DC86V | Minimum installation size | 400mm*200mm |
| Power | 800W | Heating power | 1200W |
| Refrigerating capacity | 2200W | Electronic fan | 120W |
| Blower | 400m³/h | Number of air outlets | 3 |
| Weight | 20kg | External machine dimensions | 700*700*149mm |
12V/24V panel display and instruction
48~72V panel display and instruction
Button description :
1. short press [ON/OFF] panel power ON, long press [power switch] panel power OFF
2. Press [AIR+] to increase AIR supply; Press [AIR-] to reduce AIR supply,
3. Press TEMP+ to set the temperature value; Press TEMP- to lower the temperature.
4. Press [MODE] to switch three modes of air supply, refrigeration and heating.
Air conditioning function description:
1. The lowest temperature that can be set for refrigeration is 3-30ºC (this is the temperature of the outlet); The maximum heating temperature can be set at 70ºC (this is the air outlet temperature).
2. When the temperature of the air outlet is lower than the set temperature, the refrigeration mode will not start. Heating is not restricted.
3. Air volume 5 gears can be adjusted.
4. Mode key can switch between refrigeration (snowflake sign) and heating mode (small sun sign). In heating mode, if the setting temperature is higher than the temperature displayed on the panel, heating will be started; otherwise, it will not be started.
5. Press the temperature up and down key to adjust the temperature, and the wind speed up and down key to adjust the wind speed.
6. The default shutdown state is when the machine is powered on by default. The default cooling mode is when the machine is powered on for the first time. The default medium speed is when the machine is powered on again.
7. In the cooling mode, only when the temperature of the detected air outlet is two degrees higher than the set temperature, the external fan and compressor will start to work successively;
8. Under pressure and overpressure protection, internal and external machine and compressor will stop working, troubleshooting, need to shut down and restart can be restored to normal.
Warm prompt:
1. before installation, please confirm whether the battery and generator match: 12V air conditioning requirements battery ≥150A, generator ≥100A; 24V air conditioning requirements battery ≥100A, generator ≥80A; 48-72 v air conditioner battery ≥50A is recommended.
2. It is recommended to clean the condenser regularly to prevent serious ash accumulation and affect the refrigeration effect.
3. The refrigerant has been added before delivery, so there is no need to add it repeatedly.
4. If it is not used for a long time, be sure to cut off the power supply and remove the power cord from the battery.
1. Intelligent frequency conversion,
2. energy saving and mute
3. Heating&cooling function
4. High voltage and low voltage protection
5. rapid cooling, fast heating
To keep drivers well-rested and contribute greater safety on the road, our powerful rooftop air-conditioning system ensures pleasant temperatures and humidity, creating an ideal climate with the electric parking cooler system for trucks, buses and vans. Our compressor-driven system is filled with refrigerant HFC134a and is connected to the 12/24V vehicle battery.
Installation in the existing roof opening is very simple and time-saving. High-quality components set up a high quality standard for parking coolers and ensure a long life with a minimum expenditure on maintenance. The electric parking cooler reduces engine idling times and therefore saves fuel. The low-voltage cutoff ensures that the engine will start.
Hebei Nanfeng Automobile Equipment (Group) Co.,Lid is a group company with 5 factories, that specially produce heaters and heater parts for more than 30 years. We are the leading parking heater manufacturers in China.
Our factory's production units are equipped with high tech machineries, strict quality control testing devices and a team of professional technicians and engineers endorsing the quality and authenticity of our products.
In 2006, our company has passed ISO/TS16949:2002 quality management system certification. We also bagged the CE certificate and Emark certificate making us amongst the only few companies in the world acquiring such high level certifications.
Currently being the largest stakeholders in China, we hold a domestic market share of 40% and then we export them around the globe particularly in Asia, Europe and Americas.
Meeting the standards and demands of our customers have always been our top priority. It always encourages our experts to continuously brain storm, innovate, design and manufacture new products, impeccably suitable for the Chinese market and our customers from every nook of the world.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}